Markers

Designed in cooperation with Jesse Richman, M.D., USA. Mark the desired axis of toric placement. The mark is performed preoperatively, which elimin...

Marks the limbus at 3, 6 and 9 o'clock. . Helps to avoid the effect of cyclotortion. . Gravity weight system assures excellent visualization and ba...

Toric IOL Marker, Intra-Op, Length 130 mm, Titanium

Marks the limbus at 3, 6 and 9 o'clock. . Helps to avoid the effect of cyclotortion. . Gravity weight system assures excellent visualization and ba...

3 asymmetrical marking lines to ensure right placement of a corneal flap. . Designed both for nasal and superior hinge.

Marks both horizontal and toric axes pre-operatively, which eliminates an Intra-op step. Equipped with rotating ring for accurate alignment. Reduce...

Bores Axis Marker, Used with Gauges 2-034T, 2-036T to Mark the Axis, Length 123 mm, Titanium

Creates centering indentation on the cornea which the surgeon can easily follow when performing a capsulorhexis. Allows for proper sizing and great...

Intra-Op. . Designed to mark the axis using the pre-op marks as a reference. . Slightly curved 12.00 mm blade provides excellent apposition to the ...

Corneal Transplant Marker, 7.00/11.00 mm, Length 123 mm, Titanium

Hoffer Optical Zone Marker, with Cross Hairs, 8.50 mm, Length 103 mm, Round Titanium Handle

Hoffer Optical Zone Marker, with Cross Hairs, 6.00 mm, Length 103 mm, Round Titanium Handle

Hoffer Optical Zone Marker, with Cross Hairs, 9.00 mm, Length 103 mm, Round Titanium Handle

Hoffer Optical Zone Marker, with Cross Hairs, 8.00 mm, Length 103 mm, Round Titanium Handle

Platforms mark two 2.5 mm long arcs positioned 2.5 mm from the limbus for indicating the correct penetration points and the length of the intrascle...

Hoffer Optical Zone Marker, with Cross Hairs, 5.00 mm, Length 103 mm, Round Titanium Handle

Hoffer Optical Zone Marker, with Cross Hairs, 7.50 mm, Length 103 mm, Round Titanium Handle

Double-ended (10.00 mm and 11.00 mm diameters). With central marking point. Improves centration of the cornea during DSAEK microkeratome preparatio...

I&II marks do not interfere with vision. More stable staining. Allows to apply 1.5 mm straight I&II marks at the very edge of the graft. No...

Osher-Neuman Low Profile Corneal Marker, 8 Lines, Length 130 mm, Titanium

Tunnel Zone Marker, 4.00/6.00 mm Diameter, 40° Angled to Handle, Length 127 mm, Titanium

LRI Marker, 40-60-80 Degrees, With Degree Gauges, Length 130 mm, Titanium

Thin beveled blades on the rotatable head allow to precisely locate arcuate marks along the axis even without the use of ink. Low-profile contribut...

Lum LRI Gravity Axis Marker, Pre-Op, 14.00 mm, Angled, Horizontal Axis 3' and 9', Length 140 mm, Round Titanium Handle, Stainless Steel Gravity System